JBL CSS-H30 30 Watt Paging Horn

The Commercial Solutions Series CSS-H30 Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm and industrial applications. Designed for demanding environmental conditions, the CSS-H30 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The focused coverage pattern allows the horn to project the sound a farther distance than is the case with wider-coverage paging horns. Typical applications for this product are public access areas, warehouses, factories, schools, recreational facilities, commercial buildings, distribution centers, civic centers, and other commercial sound and protectivesignaling systems.

Features

Excellent voice range clarity for announcement and paging.

High sensitivity delivers high sound levels with minimal power amplification.

Focused 50° horizontal by 70° vertical coverage for long throw capability.

Phenolic diaphragm driver for outdoor durability and high reliability.

UL-registered 30-watt multi-tap transformer, with 8 ohm direct bypass.

Built-in high-pass filter enhances reliability by protecting against low frequency damage.

Highly weather-resistant, with stainless steel bracket and hardware.

Public Access Areas

Warehouses

Factories

Recreational Facilities

Commercial Buildings

Attribute

Value

Model

CSS-H30

Frequency Range (-10dB)

380 Hz – 6 kHz

Coverage Angle

50°H x 70°V

Included High-Pass Filter

Passive 350 Hz high-pass filter built-in to protect against damage from frequencies below operational range.

Directivity Factor (Q)

15.8 (2 kHz)

Directivity Index (DI)

12 (2 kHz)

Power Rating

30 W (120 W peak), 100 hrs.

Sensitivity (1W, 2.83V@ 1m)

108 dB, ave. 1 kHz – 6 kHz112 dB at 1.4 kHz

Maximum SPL (1m)

123 dB cont ave. (129 dB peak), 1 kHz – 6 kHz; 127 dB cont ave. (133 dB peak), 1.4 kHz, 30W input, 8 ohm Setting

Impedance

30W/70V, NC/100V tap: 167 ohms 15W/70V, 30W/100V tap: 333 ohms 7.5W/70V, 15W/100V tap: 667 ohms 3.8W/70V, 7.5W/100V tap: 1333 ohms 1.9W/70V, 3.8W/100V tap: 2666 ohms 8 ohms at 8 ohm direct setting

Transformer Taps

70V: 30W, 15W, 7.5W, 3.8W, 1.9W100V: 30 W, 15W, 7.5W, 3.8W

Drivers

38 mm (1.5 in) diameter with phenolic diaphragm

Horn Material

ABS

Mounting Hardware

Stainless steel powder-coated U-bracket (yolk) with 3 x 10.4 mm (0.41 in) dia mounting holes, stainless steel exterior hardware.

Color

RAL9016 (horn and bracket)

Input Connectors

300 mm (12 in) pigtail to bare wire; entrance via watertight fitting. Wire colors: red = positive (+); black = negative (-).